HomeCompetition ExamsStaff Selection Commission Junior Engineers Exam

SSC JE 2024 Exam - Paper 1 Result (Out), Answer key (Released), Cutoff

Updated on 12th November, 2024 by Team Careers360

About SSC JE 2024

Staff Selection Commission has released SSC JE tier 2 provisional answer key 2024 on November 11, 2024 on the official website, ssc.gov.in. Candidates can challenge the SSC JE answer key until November 14, 2024. The SSC JE 2024 tier 2 exam was conducted on November 6, 2024. The commission released the SSC JE 2024 final answer key and scorecard for paper 1 on August 22, 2024. The SSC JE 2024 results for paper 1 were released in online mode on August 20, 2024 on their official website. The commission previously announced the revised vacancy details for SSC JE exam 2024 on the official website. A total of 1765 vacancies have been announced in the notification.

The commission closed the SSC JE 2024 answer key challenge facility on June 15, 2024. The Commission released the provisional SSC JE answer key 2024 for Paper 1 on June 12, 2024. The SSC JE 2024 paper 1 exam was conducted from June 5 to 7, 2024. The commission had issued the SSC JE 2024 admit card for Paper 1 from May 28, 2024 onwards at their respective regional websites. SSC JE 2024 application form correction window was activated from April 22 to 23, 2024. The commission had closed the application form window on April 18, 2024. The SSC JE 2024 notification and the application form was released on March 28, 2024 at the official website.

SSC JE is conducted to recruit candidates for the posts of Junior Engineers (Civil, Mechanical, Electrical and Quantity Surveying & Contract) in various central government departments. SSC will conduct the exam in two stages – Paper 1 and 2 to shortlist candidates for the recruitment process.

SSC Paper 1 comprises objective-type questions while Paper 2 consists of only conventional-type questions. Candidates are shortlisted for each stage based on their performance in the previous stage. Candidates qualifying for Paper 2 have to appear for Document Verification after which the final result is announced. Based on the final result, candidates are selected for recruitment to the posts available under various departments as Junior Engineers.

Read more

SSC JE 2024 Highlights

Full Exam Name
Staff Selection Commission Junior Engineers Exam
Short Exam Name
SSC JE
Conducting Body
Staff Selection Commission
Frequency Of Conduct
Once a year
Exam Level
National Level Exam
Languages
English +1 more
Mode Of Application
online
Application Fee
Offline : 100 +1 more
Mode Of Counselling
online +1 more
Exam Duration
Paper 1:2 Hours +1 more
No Of Seats
1760

SSC JE Important Dates

SSC JE Staff Selection Commission Junior Engineers Exam (session 2024)

28 Mar' 2024 - 18 Apr' 2024 . Online
Application Date
19 Apr' 2024 - 19 Apr' 2024 . Online
Others
Fee payment last date
22 Apr' 2024 - 23 Apr' 2024 . Online
Application Correction Date

SSC JE Paper 1 (session 2024)

05 Jun' 2024 - 07 Jun' 2024 . Online
Exam Date
12 Jun' 2024 - 12 Jun' 2024 . Online
Answer Key Date
12 Jun' 2024 - 15 Jun' 2024 . Online
Answer Key Date
Challenged

Read More

SSC JE Paper 2 (session 2024)

06 Nov' 2024 - 06 Nov' 2024 . Online
Exam Date
28 Oct' 2024 - 06 Nov' 2024 . Online
Admit Card Date
11 Nov' 2024 - 11 Nov' 2024 . Online
Answer Key Date

Read More

The result of SSC JE 2024 for Paper 1 has been declared online on August 20, 2024 on the official website. SSC JE result contains the names and roll numbers of candidates who have qualified the exam stage. Candidates can check whether they have qualified the exam stage by checking whether their names and roll number are present in the pdf file. Candidates qualifying Paper 1 are selected for Paper 2.

SSC JE Result for Paper 2

Staff Selection Commission announces the result of SSC JE Paper 2 online as a pdf file. The result comprises the names and roll numbers of those candidates who have qualified Paper 2 of SSC JE. Candidates qualifying Paper 2 need to appear for Document Verification. 

After the conduct of Document Verification, SSC releases the final result of SSC JE. On the basis of the final result, candidates are recruited for the posts they have applied under. The final result is prepared on the basis of candidates performance in Paper 1 and 2 provided they produce all valid documents/ certificated on the day of Document Verification.

The eligibility criteria of SSC JE 2024 is prescribed by Staff Selection Commission along with the notification. SSC JE eligibility criteria 2024:

Nationality: Candidates must be citizens of India

Educational Qualification: Candidates must hold a diploma or degree in their respective field.

Age Limit:

For the posts for which the age limit is upto 30 years


Candidate must have been born not earlier than August 2, 1993 and not later than August 1, 2005

For the posts for which the age limit is upto 32 years


Candidate must have been born not earlier than August 2, 1991 and not later than August 1, 2005.

Age Limit (Post wise):

OrganizationPostEssential Educational QualificationsAge Limit
Border Roads Organization (BRO)JE (C)Degree in Civil Engineering from a recognized University/Institute; or
(a) Three years Diploma in Civil Engineering from a recognized University/Institute/Board; and
(b) Two years of working experience in Planning/ Execution/Maintenance of Civil Engineering works.
Upto 30 years
JE (E & M)Degree in Electrical or Mechanical Engineering from a recognized University/Institute;
or
(a) Three years Diplomas in Electrical/Automobile/Mechanical Engineering from a recognized University/Institute/ Board;
and
(b) Two years experience in Planning/Execution/ Maintenance of Electrical or Mechanical Engineering works.
Upto 30 years
Central Water CommissionJE (C)Bachelor’s Degree or Diploma in Civil Engineering from a recognized University or Institution.Upto 30 years
JE (M)Bachelor’s Degree or Diploma in Mechanical Engineering from a recognized University or InstitutionUpto 30 years
Department of Water Resources, River Development & Ganga Rejuvenation (Brahmaputra
Board)
JE (C)Three years Diploma in Civil Engineering from a recognized University or Institution.Upto 30 years
Farakka Barrage Project (FBP)JE (C)Diploma in Civil Engineering from a recognized University or Institute or Board.Upto 30 years
JE (M)Diploma in Mechanical Engineering from a recognized University or Institute or Board.Upto 30 years
Military Engineer Services (MES)JE (C)Degree in Civil Engineering from a recognized University; or

(a) Three years Diploma in Civil Engineering from a recognized Institute or University or Board; and
(b) Two years’ experience in Planning, Execution and Maintenance of Civil Engineering works.
Upto 30 years
JE (E & M)Degree in Electrical or Mechanical Engineering from a recognized University;
or
(a) Three years diploma in Electrical or Mechanical Engineering from a recognized Institute or University or Board; and
(b) Two years experience in Planning, Execution and Maintenance of Electrical or Mechanical Engineering Works
Upto 30 years
Ministry of Ports, Shipping & Waterways (Andaman Lakshadweep
Harbour Works)
JE (C)Diploma in Civil Engineering from a recognized Institution.Upto 30 years
JE (M)Diploma in Mechanical Engineering from a recognized Institution.Upto 30 years
National Technical Research Organization (NTRO)JE(C)Diploma in Civil Engineering from a recognized University/Institution.Upto 30 years
JE (E)Diploma in Electrical Engineering recognized University/Institution.Upto 30 years
JE (M)Diploma in Mechanical Engineering from a recognized University/Institution.Upto 30 years
Central Public Works Department (CPWD)JE (C)Diploma in Civil Engineering from a recognized University or Institute.Upto 32 years
JE (E)Diploma in Electrical or Mechanical Engineering from a recognized University or
Institute.
Upto 32 years

Staff Selection Commission released the SSC JE 2024 application form in online on March 28, 2024. The application form of SSC JE 2024 can be submitted on or before April 18, 2024 on the official website. To apply for the exam, candidates need to register for the exam following which they can fill out the detailed application form. The SSC JE application form correction window 2024 was be opened between April 22 to 23, 2024.

After filling in all the required details, candidates need to pay the application fee. General and OBC category candidates have to pay Rs. 100 as a fee while women, SC and ST categories are exempted from payment of a fee. Candidates can pay the fee using a Credit/ Debit card, BHIM, and Net banking.

Steps to Fill out SSC JE application form 2024:

  • Register by filling in basic information  
  • After registering successfully, the registration number and password will be generated
  • Login to fill out the detailed application form
  • Upload scanned copy of photograph and signature  
  • Pay the application fee
  • Submit application form 

Exclusive Careers360 Premium Content

Get education, career guidance; live webinars; learning resources and more

Subscribe Now

Documents Required at Exam SSC JE 2024

Staff Selection Commission Junior Engineers Exam 2024

  • Aadhaar card
  • Voter ID card
  • Driving license
  • Government issued identity card
  • Admit card

SSC JE 2024 Exam Centers

StateCity
Uttarakhand
Dehradun
Delhi
New Delhi
Rajasthan
Jaipur
Telangana
Hyderabad
Nizamabad
Warangal
Andhra Pradesh
Vijayawada
Visakhapatnam
Tamil Nadu
Chennai
Puducherry
Pondicherry
Sikkim
Gangtok
Jharkhand
Ranchi
West Bengal
Kolkata
Odisha
Bhubaneshwar
Andaman and Nicobar Islands
Port Blair
Gujarat
Ahmedabad
Maharashtra
Mumbai
Nagpur
Goa
Panaji
Uttar Pradesh
Allahabad
Lucknow
Bihar
Patna
Arunachal Pradesh
Itanagar
Assam
Guwahati
Manipur
Imphal
Churachandpur
Nagaland
Kohima
Meghalaya
Shillong
Tripura
Agartala
Mizoram
Aizawl
Karnataka
Bangalore
Kerala
Thiruvananthapuram
Lakshadweep
Kavaratti
Madhya Pradesh
Bhopal
Chhattisgarh
Jagdalpur
Raipur
Jammu and Kashmir
Baramulla
Jammu
Srinagar
Himachal Pradesh
Shimla
Chandigarh
Chandigarh

As per the SSC JE exam pattern, Paper 1 contains objective-type questions. For each wrong answer, 0.25 marks are deducted. The SSC JE test is held for two hours. The test is conducted for a total of 200 marks. Candidates are awarded 1 mark for every correct response, while 0.25 marks are deducted for incorrect answers.

Parts

Subject

Number of  Questions

Total marks

General Intelligence Reasoning

50   

50

2       

General Awareness

50

50

3

General Engineering Part – A (Civil & Structural)

or

Part – B (Electrical)

or

Part – C (Mechanical)

100

100

SSC JE Paper 2

The SSC JE Paper II exam is conducted in the online Computer based mode and candidates are allotted 2 hours to complete the test. In Paper 2, candidates must attempt the part of the paper they have applied for in the application form. There will be a negative marking of one mark for each wrong answer. The exam pattern of SSC JE Paper 2 has been provided in the table below.

Parts

Subject

Total no. of Questions / Total Marks

Part-A


        

General Engineering (Civil and Structural)  

or

100/300

Part- B

General Engineering (Mechanical)

or

Part- C

General Engineering (Electrical)

or

Other Competition Exams

Graduate Record Exam
Apply for GRE® Test now & save 10% with ApplyShop Gift Card | World's most used Admission Test for Graduate & Professional Schools
Test of English as Foreign Language
Accepted by more than 11,000 universities in over 150 countries worldwide

SSC JE 2024 Syllabus

SSC JE 2024 Paper 1 2024

General intelligence and reasoning: Unit 01


Analogies

    General intelligence and reasoning: Unit 02


    Similarities

      General intelligence and reasoning: Unit 03


      Differences

        General intelligence and reasoning: Unit 04


        Space visualization

          General intelligence and reasoning: Unit 05


          Problem solving

            General intelligence and reasoning: Unit 06


            Analysis

              General intelligence and reasoning: Unit 07


              Judgment

                General intelligence and reasoning: Unit 08


                Decision making

                  General intelligence and reasoning: Unit 09


                  Visual memory

                    General intelligence and reasoning: Unit 10


                    Discrimination

                      General intelligence and reasoning: Unit 11


                      Observation

                        General intelligence and reasoning: Unit 12


                        Relationship concepts

                          General intelligence and reasoning: Unit 13


                          Arithmetical reasoning

                            General intelligence and reasoning: Unit 14


                            Verbal and figure classification

                              General intelligence and reasoning: Unit 15


                              Arithmetical number series

                                General intelligence and reasoning: Unit 16


                                Abstract ideas and symbols, and their relationships

                                  General intelligence and reasoning: Unit 17


                                  Arithmetical computations and other analytical functions

                                    General engineering: Civil & structural: Unit 01


                                    Civil engineering
                                    • Building materials, estimating, costing and valuation, surveying, soil mechanics, hydraulics, irrigation engineering, transportation engineering, environmental engineering

                                    General engineering: Civil & structural: Unit 02


                                    Structural engineering
                                    • Theory of structures, concrete technology, RCC design, steel design

                                    General engineering: Electrical: Unit 01


                                    Electrical engineering
                                    • Basic concepts, circuit law, magnetic circuit, AC fundamentals, measurement and measuring instruments, electrical machines, fractional kilowatt motors and single phase induction motors, synchronous machines, generation, transmission and distribution
                                    • Estimation and costing, utilization and electrical energy, basic electronics

                                    General engineering: Mechanical: Unit 01


                                    Mechanical engineering
                                    • Theory of machines and machine design, engineering mechanics and strength of materials, properties of pure substances, 1st law of thermodynamics, 2nd law of thermodynamics, air standard cycles for IC engines, IC engine performance, IC engines combustion
                                    • IC engine cooling & lubrication, Rankine cycle of system, boilers, classification, specification, fitting & accessories, air compressors & their cycles, refrigeration cycles, principle of refrigeration plant, nozzles & steam turbines
                                    • Properties & classification of fluids, fluid statics, measurement of fluid, pressure, fluid kinematics, dynamics of ideal fluids, measurement of flow rate, basic principles, hydraulic turbines, centrifugal pumps, classification of steel
                                    SSC JE 2024 Paper 2 2024

                                    General engineering (civil & structural engineering): Unit 01


                                    Building materials
                                    • Physical and chemical properties, classification, standard tests, uses and manufacture/ quarrying of materials example building stones, silicate based materials, cement (Portland), asbestos products, timber, and wood based products, laminates
                                    • Bituminous materials, paints, varnishes

                                    General engineering (civil & structural engineering): Unit 02


                                    Estimating, costing, and valuation
                                    • Estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, items of work-earthwork, brick work (modular and traditional bricks), RCC work, shuttering, timber work, painting, flooring, plastering, boundary wall
                                    • Brick building, water tank, septic tank, bar bending schedule, centre line method, mid-section formula, trapezoidal formula, Simpson's rule, cost estimate of septic tank, flexible pavements, tube well, isolates, and combined footings, steel truss
                                    • Piles and pile-caps
                                    • Valuation-value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation

                                    General engineering (civil & structural engineering): Unit 03


                                    Surveying
                                    • Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, levelling
                                    • Definition of terms used in levelling, contouring, curvature, and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation
                                    • Advanced surveying equipment

                                    General engineering (civil & structural engineering): Unit 04


                                    Soil mechanics
                                    • Origin of soil, phase diagram, definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters
                                    • Grain size distribution curves and their uses index properties of soils, Atterberg's limits, ISI soil classification and plasticity chart permeability of soil, coefficient of permeability, determination of coefficient of permeability
                                    • Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve
                                    • Computation of ultimate settlement shear strength of soils, direct shear test, vane shear test, triaxial test soil compaction, laboratory compaction test, maximum dry density and optimum moisture content, earth pressure theories
                                    • Active and passive earth pressures, bearing capacity of soils, plate load test, standard penetration test

                                    General engineering (civil & structural engineering): Unit 05


                                    Hydraulics
                                    • Fluid properties, hydrostatics, measurements of flow, Bernoulli's theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines

                                    General engineering (civil & structural engineering): Unit 06


                                    Irrigation engineering
                                    • Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, hydrology-measurement of rainfall, run off coefficient, rain gauge, losses from precipitation-evaporation, infiltration, etc, water requirement of crops, duty
                                    • Delta and base period, kharif and rabi crops, command area, time factor, crop ratio, overlap allowance, irrigation efficiencies, different type of canals, types of canal irrigation, loss of water in canals
                                    • Canal lining-types and advantages shallow and deep to wells, yield from a well weir and barrage, failure of weirs and permeable foundation, slit and scour, Kennedy's theory of critical velocity, Lacey's theory of uniform flow
                                    • Definition of flood, causes and effects, methods of flood control, water logging, preventive measure land reclamation, characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes
                                    • Major irrigation projects in india

                                    General engineering (civil & structural engineering): Unit 07


                                    Transportation engineering
                                    • Highway engineering-cross sectional elements, geometric design, types of pavements, pavement materials-aggregates and bitumen, different tests, design of flexible and rigid pavements-water bound macadam (WBM) and wet mix macadam (WMM), gravel road
                                    • Bituminous construction, rigid pavement joint, pavement maintenance, highway drainage, railway engineering-components of permanent way-sleepers, ballast, fixtures, and fastening, track geometry, points and crossings, track junction, stations and yards
                                    • Traffic engineering-different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety

                                    General engineering (civil & structural engineering): Unit 08


                                    Environmental engineering
                                    • Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments, surface water drainage, solid waste management-types, effects
                                    • Engineered management system, air pollution-pollutants, causes, effects, control noise pollution-cause, health effects, control

                                    General engineering (civil & structural engineering): Unit 09


                                    Structural engineering
                                    • Theory of structures: Elasticity constants, types of beams-determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams
                                    • Theory of structures: Moment of area and moment of inertia for rectangular, and circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads
                                    • Theory of structures: Slope deflection of simply supported and cantilever beams, critical load and columns, torsion of circular section

                                    General engineering (civil & structural engineering): Unit 10


                                    Concrete technology
                                    • Properties, advantages, and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete
                                    • Hot weather and cold weather concreting, repair and maintenance of concrete structures

                                    General engineering (civil & structural engineering): Unit 11


                                    RCC design
                                    • RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams T-beams, lintels, one way and two way slabs, isolated footings, reinforced brick works, columns, staircases
                                    • Retaining wall, water tanks (RCC design questions may be based on both limit state and working stress methods)

                                    General engineering (civil & structural engineering): Unit 12


                                    Steel design
                                    • Steel design and construction of steel columns, beams roof trusses plate girders

                                    General engineering (electrical engineering): Unit 01


                                    Basic concepts
                                    • Concepts of resistance, inductance, capacitance, and various factors affecting them, concepts of current, voltage, power, energy, and their units

                                    General engineering (electrical engineering): Unit 02


                                    Circuit law
                                    • Kirchhoff's law, simple circuit solution using network theorems

                                    General engineering (electrical engineering): Unit 03


                                    Magnetic circuit
                                    • Concepts of flux, MMF, reluctance, different kinds of magnetic materials, magnetic calculations for conductors of different configuration example straight, circular, solenoidal, etc, electromagnetic induction, self and mutual induction

                                    General engineering (electrical engineering): Unit 04


                                    AC fundamentals
                                    • Instantaneous, peak, RMS and average values of alternating waves, representation of sinusoidal wave form, simple series and parallel AC circuits consisting of RL and C, resonance, tank circuit poly phase system-star and delta connection, 3 phase power
                                    • Dc and sinusoidal response of r-land r-c circuit

                                    General engineering (electrical engineering): Unit 05


                                    Measurement and measuring instruments
                                    • Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement, measurement of frequency and phase angle, ammeter and voltmeter (both moving oil and moving iron type)
                                    • Extension of range wattmeter, multimeters, megger, energy meter, AC bridges, use of CRO, signal generator, CT, PT and their uses earth fault detection

                                    General engineering (electrical engineering): Unit 06


                                    Electrical machines
                                    • DC machine: Construction, basic principles of DC motors and generators, their characteristics, speed control and starting of DC motors, method of braking motor, losses and efficiency of DC machines
                                    • 1 phase and 3 phase transformers: Construction, principles of operation, equivalent circuit, voltage regulation, OC and SC tests, losses and efficiency, effect of voltage, frequency and wave form on losses
                                    • 1 phase and 3 phase transformers: Parallel operation of 1 phase/ 3 phase transformers, auto transformers
                                    • 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors, methods of braking
                                    • Effect of voltage and frequency variation on torque speed characteristics, fractional kilowatt motors and single phase induction motors: Characteristics and applications

                                    General engineering (electrical engineering): Unit 07


                                    Synchronous machines
                                    • Generation of 3-phase EMF armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power starting, and applications of synchronous motors

                                    General engineering (electrical engineering): Unit 08


                                    Generation, transmission, and distribution
                                    • Different types of power stations, load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations power factor improvement, various types of tariffs, types of faults
                                    • Short circuit current for symmetrical faults switchgears-rating of circuit breakers, principles of arc extinction by oil and air, HRC fuses, protection against earth leakage/ over current, etc, Buchholz relay
                                    • Merz-price system of protection of generators and transformers, protection of feeders and bus bars lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system cable
                                    • Different type of cables, cable rating, and derating factor

                                    General engineering (electrical engineering): Unit 09


                                    Estimation and costing
                                    • Estimation of lighting scheme, electric installation of machines and relevant IE rules earthing practices, and IE rules

                                    General engineering (electrical engineering): Unit 10


                                    Utilization of electrical energy
                                    • Illumination, electric heating, electric welding, electroplating, electric drives and motors

                                    General engineering (electrical engineering): Unit 11


                                    Basic electronics
                                    • Working of various electronic devices example P-N Junction diodes, transistors (NPN and PNP type), BJT and JFET simple circuits using these devices

                                    General engineering (mechanical engineering): Unit 01


                                    Theory of machines and machine design
                                    • Concept of simple machine, four bar linkage and link motion, flywheels and fluctuation of energy, power transmission by belts-V-belts and flat belts, clutches-plate and conical clutch, gears-type of gears, gear profile, and gear ratio calculation
                                    • Governors-principles and classification, riveted joint, cams, bearings, friction in collars and pivots

                                    General engineering (mechanical engineering): Unit 02


                                    Engineering mechanics and strength of materials
                                    • Equilibrium of forces, law of motion, friction, concepts of stress and strain, elastic limit and elastic constants, bending moments and shear force diagram, stress in composite bars, torsion of circular shafts, bucking of columns
                                    • Euler's and Rankin's theories, thin walled pressure vessels

                                    General engineering (mechanical engineering): Unit 03


                                    Thermal engineering
                                    • Properties of pure substances: P-V and P-T diagrams of pure substance like H2O, introduction of steam table with respect to steam generation process; definition of saturation, wet and superheated status, definition of dryness fraction of steam
                                    • Properties of pure substances: Degree of superheat of steam H-S chart of steam (Mollier's chart)
                                    • 1st law of thermodynamics: Definition of stored energy and internal energy, 1st law of thermodynamics of cyclic process, non flow energy equation, flow energy and definition of enthalpy, conditions for steady state steady flow
                                    • 1st law of thermodynamics: Steady state steady flow energy equation
                                    • 2nd law of thermodynamics: Definition of sink, source reservoir of heat, heat engine, heat pump and refrigerator; thermal efficiency of heat engines and coefficient of performance of refrigerators
                                    • 2nd law of thermodynamics: Kelvin-Planck and Clausius statements of 2nd law of thermodynamics, absolute or thermodynamic scale of temperature, Clausius integral, entropy, entropy change calculation of ideal gas processes Carnot cycle and Carnot efficiency
                                    • 2nd law of thermodynamics: PMM-2; definition and its impossibility
                                    • Air standard cycles for IC engines: Otto cycle; plot on P-V, T-S planes; thermal efficiency, diesel cycle; plot on P-V, T-S planes; thermal efficiency. IC engine performance, IC engine combustion, IC engine cooling and lubrication
                                    • Rankine cycle of steam: Simple Rankine cycle plot on P-V, T-S, H-S planes, Rankine cycle efficiency with and without pump work boilers; classification; specification
                                    • Rankine cycle of steam: Fittings and accessories-fire tube and water tube boilers air compressors and their cycles refrigeration cycles; principle of a refrigeration plant; nozzles and steam turbines

                                    General engineering (mechanical engineering): Unit 04


                                    Fluid mechanics and machinery
                                    • Properties and classification of fluid: Ideal and real fluids, Newton's law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids
                                    • Fluid statics: Pressure at a point
                                    • Measurement of fluid pressure: Manometers, U-tube, inclined tube
                                    • Fluid kinematics: Stream line, laminar, and turbulent flow, external and internal flow, continuity equation
                                    • Dynamics of ideal fluids: Bernoulli's equation, total head; velocity head; pressure head; application of Bernoulli's equitation
                                    • Measurement of flow rate basic principles: Venturi meter, pilot tube, orifice meter
                                    • Hydraulic turbines: Classifications, principles
                                    • Centrifugal pumps: Classifications, Principles

                                    General engineering (mechanical engineering): Unit 05


                                    Performance production engineering
                                    • Classification of steels: Mild steal and alloy steel, heat treatment of steel, welding-Arc welding, gas welding, resistance welding, special welding techniques that is TIG, MIG, etc (brazing and soldering), welding defects and testing; NDT
                                    • Classification of steels: Foundry and casting-methods, defects, different casting processes, forging, extrusion, etc, metal cutting principles, cutting tools, basic principles of machining with-(i) lathe, (ii) milling, (iii) drilling, (iv) shaping
                                    • Classification of steels: Basic principles of machining with-(v) grinding, machines, tools, and manufacturing processes

                                    SSC JE 2024 preparation tips provide advice and suggestions to candidates in order to prepare for the exam in a better way. For the convenience of candidates, the preparation tips of SSC JE have been provided below.

                                    • Candidates must analyse the syllabus along with the exam pattern provided in the notification of SSC JE 2024.
                                    • After going through the exam pattern and syllabus, candidates must accordingly formulate a study plan which will enable them to cover the complete syllabus of the exam well before the commencement of the exam.
                                    • After covering all the topics required for the exam, candidates must begin with their revision as this will help summarize all the topics they have covered for the examination
                                    • It is crucial for candidates to know all basics of the topics that are required for the exam.
                                    • After revision, candidates must practice mock tests, previous years’ question papers, and sample papers so that they get familiar with the pattern of the exam

                                    The Commission started issuing the SSC JE 2024 admit card for Paper 1 on the official regional websites. Candidates can go to the website and download the SSC JE admit card. The admit card contains details such as candidates’ name, registration number, date, time, venue of exam, exam day guidelines and other relevant information.

                                    Candidates qualifying Paper 1 are issued SSC JE admit card to appear for Paper 2. Based on the details provided in the SSC JE admit card 2024, candidates have to report to the exam centres on the specified time. It is mandatory to carry the SSC JE admit card along with photo identity proof and three copies of passport sized photographs failing which candidates will not be allowed to appear for the test.

                                    The SSC JE admit card 2024 for both stages is made available two weeks prior to the conduct of the examination. On the day of the exam, candidates have to carry three passport-sized photographs and valid photo ID proof along with 2024 SSC JE admit card.

                                    SSC released the SSC JE tier 2 provisional answer key 2024 on November 11, 2024. The SSC JE answer key will be open for challenge until November 14, 2024. The SSC JE final answer key for tier 1 was released on August 22, 2024. Staff Selection Commission closed the SSC JE 2024 answer key challenge facility on June 15, 2024. The Commission released the provisional SSC JE answer key 2024 for Paper 1 on June 12, 2024 on the official website. 

                                    The answer key of SSC JE 2024 contains the correct answers to all questions asked in the examination. The  SSC JE Paper 1 answer key was released in online mode. Candidates can download the answer key using roll number, date of birth and exam date. With the help of the answer key, candidates are able to calculate their probable score in the exam. Candidates could challenge the answers provided in the answer key from October 13 to 15 by paying fee of Rs. 100 per objection.

                                    The cutoff of SSC JE is determined by Staff Selection Commission (SSC) along with the result. SSC declares the cutoff of SSC JE in three stages – Paper 1, Paper 2 and final allotment. The cut off is the minimum marks that candidates must secure in each stage of the exam to be selected for the next stage of selection procedure. Candidates obtaining equal to or more than the cut off of SSC JE Paper 1 are shortlisted to appear for Paper 2. SSC JE cutoff for Paper 1 will be calculated out of 200 marks.

                                    SSC JE Paper 2 Cut off

                                    The Commission determines the cutoff of SSC JE Paper 2. The cut off for this stage is prepared based on marks of Paper 2. Marks allotted for Paper 2 is 300. Candidates securing the cut off or more are eligible to appear for document verification. After Document Verification, a cutoff for final allotment is published by the Staff Selection Commission (SSC) based on the aggregate marks of Paper 1 and 2. On the basis of the cutoff for final allotment, candidates are recruited for junior engineers’ posts they have applied for.  

                                    Documents Required at SSC JE 2024 counselling

                                    Staff Selection Commission Junior Engineers Exam 2024

                                    • Class 10 certificate
                                    • Class 12 certificate
                                    • Degree/ diploma certificate

                                    Candidates applying for SSC JE are selected for recruitment for the various posts available under Junior Engineers on the basis of two exam stages – Paper 1 and Paper 2. Candidates applying successfully for the exam are issued admit card to appear for Paper 1 of the exam. On the basis of their performance in Paper 1, candidates are shortlisted to appear for Paper 2. 

                                    Candidates securing the minimum cut off in Paper 2 are called for Document Verification after which final result is declared on the basis of aggregate marks secured in Paper 1 and 2. Candidates whose names and roll numbers are mentioned in the final result are selected for recruitment to the applied post.

                                    General Information

                                    Contacts

                                    9477461228 + 17 more

                                    Relevant Links

                                    Official Website Link Click Here + 4 more

                                    Frequently Asked Questions

                                    1. When will the SSC JE exam take place?

                                    The SSC JE 2024 exam for paper 2 was conducted on November 6, 2024.

                                    2. Is there negative marking in the SSC JE exam?

                                    Yes, there is negative marking in the SSC JE paper 1 exam for every incorrect answer.

                                    3. How many papers are there in the SSC JE exam?

                                    SSC JE exam has two papers in total.

                                    4. What is the educational qulification required for SSC JE exam?

                                    Candidates must have a engineering degree in relevant discipline from recognised university.

                                    5. When is the SSC JE application form 2024 be released?

                                    SSC JE 2024 application form was released on March 28, 2024 on the official website.

                                    6. What is the minimum age to apply for SSC JE exam?

                                    Minimum age to apply for SSC JE exam is 18 years.

                                    Questions related to SSC JE

                                    Have a question related to SSC JE ?

                                    Hello,

                                    The eligibility to apply for a course or scholarship typically depends on the program or institution. For undergraduate programs like B.Tech, eligibility usually requires passing Class 12 with a minimum percentage in subjects like Physics, Chemistry, and Mathematics/Biology. For scholarships, eligibility may include income criteria, academic performance, and category-specific requirements. Always check the specific course or scholarship details on the institution's official website for accurate information.

                                    Hello Aspirant

                                    No, this will not be a problem with either your mother or your document verification. It is not a rule in India to have the same surname as your mother or father, you can choose to drop your surname and it will never be a problem. It is also not a compulsion for a wife to take their husband's name. So, you can rest assured that this will not pose a problem in your document verification in SSC JE.

                                    Hope this helps

                                    It is very east to move from SSC to CBSE in class 7th you just need to contact the school in which you want to take admission there may be entrance test you need to pass but some school give admission directly and it is also the best time to shift because mostly State Board does not lay emphasis on English communication which will create problems later moreover,The State Syllabus generally more easier when compared to CBSE. There is the reason because questions are almost never out of the textbook and almost every question is comes in exam which is mostly taught in class with revision.

                                    Hi,

                                    With your BTech degree percentage of 84 and a GATE score of 301, along with your SC category, you have a chance to secure admission in MTech programs at some IITs, but it may not be assured in the top-ranking ones due to intense competition.

                                    However, admissions also depend on various factors such as the number of seats available, the specific department and program you're applying to, and the preferences of the particular IIT you're interested in. Some IITs may consider your application favorably based on your category and GATE score.

                                    Considering your GATE score of 301 and SC category, here are a few IITs and MTech courses where you might have a chance of admission:

                                    1. IIT Delhi:

                                      • MTech in Electrical Engineering
                                      • MTech in Mechanical Engineering
                                      • MTech in Civil Engineering

                                    2. IIT Bombay:

                                      • MTech in Computer Science and Engineering
                                      • MTech in Electrical Engineering

                                    3. IIT Madras:

                                      • MTech in Aerospace Engineering
                                      • MTech in Chemical Engineering
                                      • MTech in Biotechnology

                                    4. IIT Kanpur:

                                      • MTech in Aerospace Engineering
                                      • MTech in Materials Science and Engineering

                                    It's advisable to check the respective IITs' official websites for detailed information on MTech admissions, including eligibility criteria, seat matrix, and admission procedure.

                                    Consider using the GATE College Predictor tool provided below to get more specific information.

                                    GATE College Predictor

                                    https://engineering.careers360.com/gate-college-predictor?utm_source=qna&utm_medium=ini-gate_cp


                                    Regarding SSC JE (Staff Selection Commission Junior Engineer) and SSC CGL (Combined Graduate Level) examinations:

                                    SSC JE is conducted for recruitment to the posts of Junior Engineers in various government departments, whereas SSC CGL is conducted for recruitment to Group B and C posts in various ministries, departments, and organizations of the Government of India.

                                    For both examinations, eligibility criteria vary depending on the specific posts and departments. Generally, a bachelor's degree in engineering is required for SSC JE, while for SSC CGL, a bachelor's degree in any discipline from a recognized university is required.

                                    As an SC candidate, you may have certain relaxations in terms of age limits and qualifying marks in these examinations.

                                    For detailed information on eligibility criteria, exam pattern, syllabus, and application procedures, you should refer to the official websites of SSC (Staff Selection Commission).


                                    Thank You

                                    Cut off for the previous year of SSC JE MECHANICAL ENGINEERING TIER 1 is:-

                                    • SC 112.97309
                                    • ST 101.37117
                                    • OBC 131.27256
                                    • EWS 120.13213
                                    • UR 132.06654 551
                                    • OH 86.18973 10
                                    • HH 43.62910
                                    • Others - PwD 58.92633
                                    View All
                                    Back to top